Piezoelectric actuators (PEAs) have been widely used in micro- and nanopositioning applications due to their fine resolution, rapid responses, and large actuating forces. However, a major deficiency of PEAs is that their accuracy is seriously limited by hysteresis. This paper presents adaptive model predictive control technique for reducing hysteresis in PEAs based on autoregressive exogenous m...

In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytica...

A piezoelectric dispenser has been fabricated based on the idea of a piezoelectric-metal-cavity (PMC) actuator. The PMC actuator consists of a metal ring sandwiched between two identical piezoelectric unimorphs. The radial contraction of the piezoelectric ceramic is converted into a flextensional motion of the unimorph, causing a large flexural displacement in the center part of the actuator. W...

In this paper, the active buckling control of smart functionally graded (FG) plates using piezoelectric sensor/actuator patches is studied. A simply supported FG rectangular plate which is bonded with piezoelectric rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is considered. When a constant electric charge is imposed, the governing differential equations of mo...

This study aims to develop a X-Y dual-axial intelligent servo pneumatic-piezoelectric hybrid actuator for position control with high response, large stroke (250 mm, 200 mm) and nanometer accuracy (20 nm). In each axis, the rodless pneumatic actuator serves to position in coarse stroke and the piezoelectric actuator compensates in fine stroke. Thus, the overall control systems of the single axis...

Many forms of scanning probe microscopy require a piezoelectric actuator to vary the probe-sample distance. Examples include constant-force atomic force microscopy and constant-current scanning tunneling microscopy. In such modes, the topography of the sample is reconstructed from the voltage applied to the vertical piezoelectric actuator. However, piezoelectric actuators exhibit significant hy...

In this work, we design and simulate a valve less, diaphragm-based, piezoelectric micro pump. The piezoelectric actuator is a PZT-5H piezo-disk, the diaphragm is a borosilicate glass plate. All the simulations were made using COMSOL Multiphysics software. First, the piezoelectric actuator and membrane thicknesses were chosen by means of a stationary simulation, using the piezoelectric devices m...

The Inertially Stabilized Rifle is a new stabilized rifle system that can eliminate the disturbances induced by the shooter. Recurve actuator is used in this system to provide the precise movement of the rifle barrel. In such a portable device, only low voltage electrical sources are available yet the piezoelectric actuator needs high voltage to drive the actuator. The actuators consume little ...

In this research, a functionally graded microbeam bonded with piezoelectric layers is analyzed under electric force. Static and dynamic instability due to the electric actuation is studied because of its importance in micro electro mechanical systems, especially in micro switches. In order to prevent pull-in instability, two piezoelectric layers are used as sensor and actuator. A current amplif...

This paper has been investigated a technique that predicts the performance of a bar-type unimorph piezoelectric vibration actuator depending on the frequency. This paper has been proposed an equivalent circuit that can be easily analyzed for the bar-type unimorph piezoelectric vibration actuator. In the dynamic analysis, rigidity and resonance frequency, which are important mechanical elements,...